Fujian zhichuan mechanical equipment Co., Ltd.
Fujian zhichuan mechanical equipment Co., Ltd.
Add to Cart
AVENTICS R413000901 Pneumatic Accessories High Quality Long Life Metal New Original
Product Description:
Advantages and features of AVENTICS pneumatic accessories
High efficiency, reliability and long life design
Pneumatic accessories have a simple and lightweight structure, easy installation and maintenance, high safety and low cost for air medium adaptation, solenoid valve life exceeds 30 million times, and some models can reach 200 million operations;
Adopting dual guide structure and multi-spring actuator design, it has fast response speed, precise flow characteristics, and is suitable for a variety of media such as gas and liquid.
High-precision control and modular design
Pneumatic proportional valves (such as R414002403) support analog control (DC24V), hysteresis loop is less than 0.05bar, and pressure regulation accuracy is high, which is suitable for precision industrial scenarios (such as petrochemicals, medical equipment);
Modular components support fast disassembly and maintenance, reducing downtime and maintenance costs.
Environmental adaptability and safety protection
The temperature tolerance range is wide (-25℃~60℃), and the dustproof sealing structure can cope with harsh environments such as high humidity and dust. Some models have passed explosion-proof certification;
When the air or power is cut off, the valve automatically remains in place or closes to avoid the risk of system loss of control.
Energy saving and intelligent support
Low flow resistance design reduces energy consumption, and cooperates with the compressed air centralized supply system to improve energy utilization;
Supports digital integration, can be seamlessly connected with PLC and IIoT platforms to achieve remote monitoring and automatic control.
Precautions for use
Installation specification
The valve body needs to be installed vertically (special tilt requires additional support frame), the direction of the valve body arrow is consistent with the flow direction of the medium, and the solenoid valve connection port faces upward to prevent water accumulation;
Before installation, thoroughly flush the pipeline, remove welding slag and impurities, and reset the handwheel to the neutral position after debugging.
Medium and working condition adaptation
For medium containing particles or viscous media, a filter needs to be installed (the filter element accuracy is recommended to be ≤40μm), and a pressure reducing valve is configured in front of the valve to stabilize the pressure (recommended 6.2kg/cm²);
In high temperature environment (＞50℃), a heat dissipation device needs to be added to avoid aging and failure of the seal.
Maintenance and inspection points
Regularly check the sealing: after pressurizing to the rated value, use soapy water to detect interface leakage, or observe the fluctuation of the pressure gauge to judge internal wear;
Lubrication management: add oil to the pneumatic motor every week, apply butter to the bearing part, and drain the residual liquid and apply anti-rust oil for long-term out of use.
Electrical and safety measures
The power supply voltage of the solenoid valve needs to be stable within the range of ±10% of the rated value to avoid overpressure burning the coil, and the signal line needs to be shielded to prevent interference;
A bypass pipeline needs to be configured in high-risk scenarios, and it can be switched to manual mode in case of failure to ensure continuous operation of the system.
Through the reasonable application of the above characteristics and standardized operation, Anvotech pneumatic accessories can be widely used in automated production lines, energy equipment, medical machinery and other fields, taking into account efficient operation and long-term stability.
| Material | Metal |
| Application | Industrial/Automotive |
| Valve Type | Solenoid/Manual |
| Tube Material | pu,nylon,polyurethane |
| Weight | Lightweight |
| Port Size | 1/4 inch |
| Temperature Range | 0-100 degrees Celsius |
| Fix Type | with/without spring |
| Flow Rate | High/Low |
| Pressure | 0~10.20Kgf/cm² |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.