Fujian zhichuan mechanical equipment Co., Ltd.
Fujian zhichuan mechanical equipment Co., Ltd.
Add to Cart
Product Description:
Advantages and features of Rexroth ball guides
High load-bearing capacity and optimized rigidity
Using high-carbon chromium bearing steel material, the surface hardness reaches HRC60 or above after high-frequency induction heat treatment. Combined with the optimized cross-sectional shape design, it can achieve high rated load capacity in all load directions, suitable for high-speed cutting and heavy-load scenarios.
The high-rigidity design of the guide rail and the slider effectively resists deformation, ensures stability and precision during high-speed movement, and reduces the risk of processing errors.
Precision motion performance
The rolling friction is small and the difference between static and dynamic friction is extremely small, supporting micron-level positioning accuracy, meeting the requirements of CNC machine tools, semiconductor equipment, etc. for micro-feeding.
The ball circulation system is combined with precision-machined rails, and the straightness and parallelism of the motion trajectory are controlled within a very small error range, reducing the deviation caused by mechanical vibration.
Long life and low maintenance requirements
The integrated sealing device and lubrication channel design effectively prevent dust intrusion and reduce lubricant consumption. The lubrication interval can be extended to 20,000 kilometers, reducing the frequency of downtime maintenance.
The surface hardening treatment and roller rolling process of the guide rail enhance wear resistance, reduce the wear rate of long-term operation, and adapt to high-frequency reciprocating motion scenarios.
Easy installation and compatibility
The guide rail adopts a standardized interface design, which does not require complex scraping processing, supports the slider and the same model of slide rails to be interchanged at will, and simplifies the equipment upgrade and maintenance process.
It can be adapted to a variety of lubrication methods and protective covers (such as dust scrapers) to flexibly respond to the needs of different industrial environments.
Precautions for use
Selection and installation specifications
Select the guide rail model according to the load type (radial/axial), speed and accuracy level (general to ultra-precision) to avoid deformation or failure of the guide rail due to insufficient load capacity.
Before installation, clean the contact surface of the guide rail and evenly apply the specified grease to ensure that the slider and the guide rail are accurately aligned to prevent installation stress from causing motion jamming.
Operation environment management
Avoid chips, dust and other pollutants from entering the guide rail. It is recommended to clean the dustproof device regularly and install an external protective cover in a dusty environment.
In high temperature or corrosive media scenarios, guide rail models with hard chrome plating or special coatings should be selected to prevent material corrosion or grease failure.
Maintenance and inspection requirements
Regularly check the lubrication status and add special grease through the integrated lubrication interface. It is forbidden to mix lubricants of different brands or models.
Monitor the smoothness of the slider operation. If abnormal noise, vibration or positioning deviation occurs, stop the machine immediately to check the ball wear or guide rail damage.
Storage and special working condition handling
Uninstalled guide rails need to be sealed and stored in a dry environment. Before long-term storage, anti-rust oil should be applied and stacking deformation should be avoided.
Under frequent start-stop or impact load conditions, it is recommended to shorten the lubrication cycle and use a shock absorber to reduce fatigue damage to the ball and rail.
Note: For actual application, refer to the parameter manual of the specific model (such as BSHP series) and follow the official maintenance guide of Rexroth.
| Height | Customizable |
| Durability | Long-lasting |
| Installation Method | Bolted |
| Finish | Galvanized |
| Application | Used in industrial and construction settings for guiding and supporting moving parts |
| Length | Customizable |
| Surface Hardness | High |
| Compatibility | Can be used with various types of machinery |
| Load Capacity | Varies depending on material and design |
| Precision | High |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.